ModHausdorffT_impl.hh

Go to the documentation of this file.

/* ========================================================================= *
 *                                                                           *
 *                               OpenMesh                                    *
 *           Copyright (c) 2001-2023, RWTH-Aachen University                 *
 *           Department of Computer Graphics and Multimedia                  *
 *                          All rights reserved.                             *
 *                            www.openmesh.org                               *
 *                                                                           *
 *---------------------------------------------------------------------------*
 * This file is part of OpenMesh.                                            *
 *---------------------------------------------------------------------------*
 *                                                                           *
 * Redistribution and use in source and binary forms, with or without        *
 * modification, are permitted provided that the following conditions        *
 * are met:                                                                  *
 *                                                                           *
 * 1. Redistributions of source code must retain the above copyright notice, *
 *    this list of conditions and the following disclaimer.                  *
 *                                                                           *
 * 2. Redistributions in binary form must reproduce the above copyright      *
 *    notice, this list of conditions and the following disclaimer in the    *
 *    documentation and/or other materials provided with the distribution.   *
 *                                                                           *
 * 3. Neither the name of the copyright holder nor the names of its          *
 *    contributors may be used to endorse or promote products derived from   *
 *    this software without specific prior written permission.               *
 *                                                                           *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS       *
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED *
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A           *
 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER *
 * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  *
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,       *
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR        *
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    *
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING      *
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS        *
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.              *
 *                                                                           *
 * ========================================================================= */
 
 
//=============================================================================
//
//  CLASS ModHausdorffT - IMPLEMENTATION
//
//=============================================================================
 
#define OPENMESH_DECIMATER_MODHAUSDORFFT_C
 
 
//== INCLUDES =================================================================
 
#include "ModHausdorffT.hh"
 
 
//== NAMESPACES ===============================================================
 
namespace OpenMesh  {
namespace Decimater {
 
//== IMPLEMENTATION ==========================================================
 
template <class MeshT>
typename ModHausdorffT<MeshT>::Scalar
ModHausdorffT<MeshT>::
distPointTriangleSquared( const Point& _p,
                          const Point& _v0,
                          const Point& _v1,
                          const Point& _v2 )
{
  const Point v0v1 = _v1 - _v0;
  const Point v0v2 = _v2 - _v0;
  const Point n = v0v1 % v0v2; // not normalized !
  const Scalar d = sqrnorm(n);
 
 
  // Check if the triangle is degenerated
  if (d < FLT_MIN && d > -FLT_MIN) {
    return -1.0;
  }
  const Scalar invD = static_cast<Scalar>(1.0) / d;
 
  // these are not needed for every point, should still perform
  // better with many points against one triangle
  const Point v1v2 = _v2 - _v1;
  const Scalar inv_v0v2_2 = static_cast<Scalar>(1.0) / sqrnorm(v0v2);
  const Scalar inv_v0v1_2 = static_cast<Scalar>(1.0) / sqrnorm(v0v1);
  const Scalar inv_v1v2_2 = static_cast<Scalar>(1.0) / sqrnorm(v1v2);
 
 
  Point v0p = _p - _v0;
  Point t = v0p % n;
  typename Point::value_type  s01, s02, s12;
  const Scalar a = (t | v0v2) * -invD;
  const Scalar b = (t | v0v1) * invD;
 
  if (a < 0)
  {
    // Calculate the distance to an edge or a corner vertex
    s02 = ( v0v2 | v0p ) * inv_v0v2_2;
    if (s02 < 0.0)
    {
      s01 = ( v0v1 | v0p ) * inv_v0v1_2;
      if (s01 <= 0.0) {
        v0p = _v0;
      } else if (s01 >= 1.0) {
        v0p = _v1;
      } else {
        v0p = _v0 + v0v1 * s01;
      }
    } else if (s02 > 1.0) {
      s12 = ( v1v2 | ( _p - _v1 )) * inv_v1v2_2;
      if (s12 >= 1.0) {
        v0p = _v2;
      } else if (s12 <= 0.0) {
        v0p = _v1;
      } else {
        v0p = _v1 + v1v2 * s12;
      }
    } else {
      v0p = _v0 + v0v2 * s02;
    }
  } else if (b < 0.0) {
    // Calculate the distance to an edge or a corner vertex
    s01 = ( v0v1 | v0p ) * inv_v0v1_2;
    if (s01 < 0.0)
    {
  // const Point n = v0v1 % v0v2; // not normalized !
      s02 = ( v0v2 |  v0p ) * inv_v0v2_2;
      if (s02 <= 0.0) {
        v0p = _v0;
      } else if (s02 >= 1.0) {
        v0p = _v2;
      } else {
        v0p = _v0 + v0v2 * s02;
      }
    } else if (s01 > 1.0) {
      s12 = ( v1v2 | ( _p - _v1 )) * inv_v1v2_2;
      if (s12 >= 1.0) {
        v0p = _v2;
      } else if (s12 <= 0.0) {
        v0p = _v1;
      } else {
        v0p = _v1 + v1v2 * s12;
      }
    } else {
      v0p = _v0 + v0v1 * s01;
    }
  } else if (a+b > 1.0) {
    // Calculate the distance to an edge or a corner vertex
    s12 = ( v1v2 | ( _p - _v1 )) * inv_v1v2_2;
    if (s12 >= 1.0) {
      s02 = ( v0v2 | v0p ) * inv_v0v2_2;
      if (s02 <= 0.0) {
        v0p = _v0;
      } else if (s02 >= 1.0) {
        v0p = _v2;
      } else {
        v0p = _v0 + v0v2*s02;
      }
    } else if (s12 <= 0.0) {
      s01 = ( v0v1 |  v0p ) * inv_v0v1_2;
      if (s01 <= 0.0) {
        v0p = _v0;
      } else if (s01 >= 1.0) {
        v0p = _v1;
      } else {
        v0p = _v0 + v0v1 * s01;
      }
    } else {
      v0p = _v1 + v1v2 * s12;
    }
  } else {
    // Calculate the distance to an interior point of the triangle
    return sqrnorm( (_p - n*((n|v0p) * invD)) - _p);
  }
 
  return sqrnorm(v0p - _p);
}
 
 
template <class MeshT>
void
ModHausdorffT<MeshT>::
initialize()
{
  typename Mesh::FIter  f_it(mesh_.faces_begin()), f_end(mesh_.faces_end());
 
  for (; f_it!=f_end; ++f_it)
    mesh_.property(points_, *f_it).clear();
}
 
 
//-----------------------------------------------------------------------------
 
 
template <class MeshT>
float
ModHausdorffT<MeshT>::
collapse_priority(const CollapseInfo& _ci)
{
  std::vector<FaceHandle>        faces;   faces.reserve(20);
  typename Mesh::VertexFaceIter  vf_it;
  typename Mesh::FaceHandle      fh;
  const typename Mesh::Scalar    sqr_tolerace = tolerance_*tolerance_;
  typename Mesh::CFVIter         fv_it;
  bool                           ok;
 
  // Clear the temporary point storage
  tmp_points_.clear();
 
  // collect all points to be tested
  // collect all faces to be tested against
  for (vf_it=mesh_.vf_iter(_ci.v0); vf_it.is_valid(); ++vf_it) {
    fh = *vf_it;
 
    if (fh != _ci.fl && fh != _ci.fr)
      faces.push_back(fh);
 
    Points& pts = mesh_.property(points_, fh);
    std::copy(pts.begin(), pts.end(), std::back_inserter(tmp_points_));
  }
 
  // add point to be removed
  tmp_points_.push_back(_ci.p0);
 
  // setup iterators
  typename std::vector<FaceHandle>::iterator  fh_it, fh_end(faces.end());
  typename Points::const_iterator             p_it, p_end(tmp_points_.end());
 
  // simulate collapse
  mesh_.set_point(_ci.v0, _ci.p1);
 
  // for each point: try to find a face such that error is < tolerance
  ok = true;
 
  for (p_it=tmp_points_.begin(); ok && p_it!=p_end; ++p_it) {
    ok = false;
 
    for (fh_it=faces.begin(); !ok && fh_it!=fh_end; ++fh_it) {
      fv_it=mesh_.cfv_iter(*fh_it);
      const Point& p0 = mesh_.point(*fv_it);
      const Point& p1 = mesh_.point(*(++fv_it));
      const Point& p2 = mesh_.point(*(++fv_it));
 
      if (  distPointTriangleSquared(*p_it, p0, p1, p2) <= sqr_tolerace)
        ok = true;
    }
  }
 
  // undo simulation changes
  mesh_.set_point(_ci.v0, _ci.p0);
 
  return ( ok ? static_cast<float>(Base::LEGAL_COLLAPSE) :  static_cast<float>(Base::ILLEGAL_COLLAPSE) );
}
 
//-----------------------------------------------------------------------------
 
template<class MeshT>
void ModHausdorffT<MeshT>::set_error_tolerance_factor(double _factor) {
  if (_factor >= 0.0 && _factor <= 1.0) {
    // the smaller the factor, the smaller tolerance gets
    // thus creating a stricter constraint
    // division by error_tolerance_factor_ is for normalization
    Scalar new_tolerance = tolerance_ * Scalar(_factor / this->error_tolerance_factor_);
    set_tolerance(new_tolerance);
    this->error_tolerance_factor_ = _factor;
  }
}
 
//-----------------------------------------------------------------------------
 
template <class MeshT>
void
ModHausdorffT<MeshT>::
postprocess_collapse(const CollapseInfo& _ci)
{
  typename Mesh::VertexFaceIter  vf_it;
  FaceHandle                     fh;
  std::vector<FaceHandle>        faces;
 
 
  // collect points & neighboring triangles
 
  tmp_points_.clear();
  faces.reserve(20);
 
  // collect active faces and their points
  for (vf_it=mesh_.vf_iter(_ci.v1); vf_it.is_valid(); ++vf_it) {
    fh = *vf_it;
    faces.push_back(fh);
 
    Points& pts = mesh_.property(points_, fh);
    std::copy(pts.begin(), pts.end(), std::back_inserter(tmp_points_));
    pts.clear();
  }
  if (faces.empty()) return; // should not happen anyway...
 
 
  // collect points of the 2 deleted faces
  if ((fh=_ci.fl).is_valid()) {
    Points& pts = mesh_.property(points_, fh);
    std::copy(pts.begin(), pts.end(), std::back_inserter(tmp_points_));
    pts.clear();
  }
  if ((fh=_ci.fr).is_valid()) {
    Points& pts = mesh_.property(points_, fh);
    std::copy(pts.begin(), pts.end(), std::back_inserter(tmp_points_));
    pts.clear();
  }
 
  // add the deleted point
  tmp_points_.push_back(_ci.p0);
 
 
  // setup iterators
  typename std::vector<FaceHandle>::iterator  fh_it, fh_end(faces.end());
  typename Points::const_iterator             p_it, p_end(tmp_points_.end());
 
  // re-distribute points
  Scalar                  emin, e;
  typename Mesh::CFVIter  fv_it;
 
  for (p_it=tmp_points_.begin(); p_it!=p_end; ++p_it) {
    emin = FLT_MAX;
 
    for (fh_it=faces.begin(); fh_it!=fh_end; ++fh_it) {
      fv_it=mesh_.cfv_iter(*fh_it);
      const Point& p0 = mesh_.point(*fv_it);
      const Point& p1 = mesh_.point(*(++fv_it));
      const Point& p2 = mesh_.point(*(++fv_it));
 
      e =  distPointTriangleSquared(*p_it, p0, p1, p2);
      if (e < emin) {
        emin = e;
        fh   = *fh_it;
      }
 
    }
 
    mesh_.property(points_, fh).push_back(*p_it);
  }
}
 
 
//-----------------------------------------------------------------------------
 
 
template <class MeshT>
typename ModHausdorffT<MeshT>::Scalar
ModHausdorffT<MeshT>::
compute_sqr_error(FaceHandle _fh, const Point& _p) const
{
  typename Mesh::CFVIter           fv_it = mesh_.cfv_iter(_fh);
  const Point&                     p0    = mesh_.point(fv_it);
  const Point&                     p1    = mesh_.point(++fv_it);
  const Point&                     p2    = mesh_.point(++fv_it);
 
  const Points&                    points = mesh_.property(points_, _fh);
  typename Points::const_iterator  p_it   = points.begin();
  typename Points::const_iterator  p_end  = points.end();
 
  Point  dummy;
  Scalar e;
  Scalar emax =  distPointTriangleSquared(_p, p0, p1, p2);
 
 
 
  for (; p_it!=p_end; ++p_it) {
    e =  distPointTriangleSquared(*p_it, p0, p1, p2);
    if (e > emax)
      emax = e;
  }
 
  return emax;
}
 
 
//=============================================================================
}
}
//=============================================================================