DecimaterT_impl.hh

Go to the documentation of this file.

/* ========================================================================= *
 *                                                                           *
 *                               OpenMesh                                    *
 *           Copyright (c) 2001-2023, RWTH-Aachen University                 *
 *           Department of Computer Graphics and Multimedia                  *
 *                          All rights reserved.                             *
 *                            www.openmesh.org                               *
 *                                                                           *
 *---------------------------------------------------------------------------*
 * This file is part of OpenMesh.                                            *
 *---------------------------------------------------------------------------*
 *                                                                           *
 * Redistribution and use in source and binary forms, with or without        *
 * modification, are permitted provided that the following conditions        *
 * are met:                                                                  *
 *                                                                           *
 * 1. Redistributions of source code must retain the above copyright notice, *
 *    this list of conditions and the following disclaimer.                  *
 *                                                                           *
 * 2. Redistributions in binary form must reproduce the above copyright      *
 *    notice, this list of conditions and the following disclaimer in the    *
 *    documentation and/or other materials provided with the distribution.   *
 *                                                                           *
 * 3. Neither the name of the copyright holder nor the names of its          *
 *    contributors may be used to endorse or promote products derived from   *
 *    this software without specific prior written permission.               *
 *                                                                           *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS       *
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED *
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A           *
 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER *
 * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  *
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,       *
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR        *
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    *
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING      *
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS        *
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.              *
 *                                                                           *
 * ========================================================================= */
 
 
//=============================================================================
//
//  CLASS DecimaterT - IMPLEMENTATION
//
//=============================================================================
#define OPENMESH_DECIMATER_DECIMATERT_CC
 
//== INCLUDES =================================================================
 
#include <OpenMesh/Tools/Decimater/DecimaterT.hh>
 
#include <vector>
#if defined(OM_CC_MIPS)
#  include <float.h>
#else
#  include <cfloat>
#endif
 
//== NAMESPACE ===============================================================
 
namespace OpenMesh {
namespace Decimater {
 
//== IMPLEMENTATION ==========================================================
 
template<class Mesh>
DecimaterT<Mesh>::DecimaterT(Mesh& _mesh) :
  BaseDecimaterT<Mesh>(_mesh),
    mesh_(_mesh),
#if (defined(_MSC_VER) && (_MSC_VER >= 1800)) || __cplusplus > 199711L || defined( __GXX_EXPERIMENTAL_CXX0X__ )
  heap_(nullptr)
#else
  heap_(nullptr)
#endif
 
{
 
  // private vertex properties
  mesh_.add_property(collapse_target_);
  mesh_.add_property(priority_);
  mesh_.add_property(heap_position_);
}
 
//-----------------------------------------------------------------------------
 
template<class Mesh>
DecimaterT<Mesh>::~DecimaterT() {
 
  // private vertex properties
  mesh_.remove_property(collapse_target_);
  mesh_.remove_property(priority_);
  mesh_.remove_property(heap_position_);
 
}
 
//-----------------------------------------------------------------------------
 
template<class Mesh>
void DecimaterT<Mesh>::heap_vertex(VertexHandle _vh) {
  //   std::clog << "heap_vertex: " << _vh << std::endl;
 
  float prio, best_prio(FLT_MAX);
  typename Mesh::HalfedgeHandle heh, collapse_target;
 
  // find best target in one ring
  typename Mesh::VertexOHalfedgeIter voh_it(mesh_, _vh);
  for (; voh_it.is_valid(); ++voh_it) {
    heh = *voh_it;
    CollapseInfo ci(mesh_, heh);
 
    if (this->is_collapse_legal(ci)) {
      prio = this->collapse_priority(ci);
      if (prio >= 0.0 && prio < best_prio) {
        best_prio = prio;
        collapse_target = heh;
      }
    }
  }
 
  // target found -> put vertex on heap
  if (collapse_target.is_valid()) {
    //     std::clog << "  added|updated" << std::endl;
    mesh_.property(collapse_target_, _vh) = collapse_target;
    mesh_.property(priority_, _vh)        = best_prio;
 
    if (heap_->is_stored(_vh))
      heap_->update(_vh);
    else
      heap_->insert(_vh);
  }
 
  // not valid -> remove from heap
  else {
    //     std::clog << "  n/a|removed" << std::endl;
    if (heap_->is_stored(_vh))
      heap_->remove(_vh);
 
    mesh_.property(collapse_target_, _vh) = collapse_target;
    mesh_.property(priority_, _vh) = -1;
  }
}
 
//-----------------------------------------------------------------------------
template<class Mesh>
size_t DecimaterT<Mesh>::decimate(size_t _n_collapses, bool _only_selected) {
 
  if (!this->is_initialized())
    return 0;
 
  typename Mesh::VertexHandle vp;
  typename Mesh::HalfedgeHandle v0v1;
  typename Mesh::VertexVertexIter vv_it;
  typename Mesh::VertexFaceIter vf_it;
  unsigned int n_collapses(0);
 
  typedef std::vector<typename Mesh::VertexHandle> Support;
  typedef typename Support::iterator SupportIterator;
 
  Support support(15);
  SupportIterator s_it, s_end;
 
  // check _n_collapses
  if (!_n_collapses)
    _n_collapses = mesh_.n_vertices();
 
  // initialize heap
  HeapInterface HI(mesh_, priority_, heap_position_);
 
#if (defined(_MSC_VER) && (_MSC_VER >= 1800)) || __cplusplus > 199711L || defined( __GXX_EXPERIMENTAL_CXX0X__ )
  heap_ = std::unique_ptr<DeciHeap>(new DeciHeap(HI));
#else
  heap_ = std::auto_ptr<DeciHeap>(new DeciHeap(HI));
#endif
 
 
  heap_->reserve(mesh_.n_vertices());
 
  for ( auto v_it : mesh_.vertices() ) {
    heap_->reset_heap_position(v_it);
 
    if (!mesh_.status(v_it).deleted()) {
      if (!_only_selected  || mesh_.status(v_it).selected() ) {
        heap_vertex(v_it);
      }
    }
 
  }
 
  const bool update_normals = mesh_.has_face_normals();
 
  // process heap
  while ((!heap_->empty()) && (n_collapses < _n_collapses)) {
    // get 1st heap entry
    vp = heap_->front();
    v0v1 = mesh_.property(collapse_target_, vp);
    heap_->pop_front();
 
    // setup collapse info
    CollapseInfo ci(mesh_, v0v1);
 
    // check topological correctness AGAIN !
    if (!this->is_collapse_legal(ci))
      continue;
 
    // store support (= one ring of *vp)
    vv_it = mesh_.vv_iter(ci.v0);
    support.clear();
    for (; vv_it.is_valid(); ++vv_it)
      support.push_back(*vv_it);
 
    // pre-processing
    this->preprocess_collapse(ci);
 
    // perform collapse
    mesh_.collapse(v0v1);
    ++n_collapses;
 
    if (update_normals)
    {
      // update triangle normals
      vf_it = mesh_.vf_iter(ci.v1);
      for (; vf_it.is_valid(); ++vf_it)
        if (!mesh_.status(*vf_it).deleted())
          mesh_.set_normal(*vf_it, mesh_.calc_face_normal(*vf_it));
    }
 
    // post-process collapse
    this->postprocess_collapse(ci);
 
    // update heap (former one ring of decimated vertex)
    for (s_it = support.begin(), s_end = support.end(); s_it != s_end; ++s_it) {
      assert(!mesh_.status(*s_it).deleted());
      if (!_only_selected  || mesh_.status(*s_it).selected() )
        heap_vertex(*s_it);
    }
 
    // notify observer and stop if the observer requests it
    if (!this->notify_observer(n_collapses))
        return n_collapses;
  }
 
  // delete heap
  heap_.reset();
 
 
 
  // DON'T do garbage collection here! It's up to the application.
  return n_collapses;
}
 
//-----------------------------------------------------------------------------
 
template<class Mesh>
size_t DecimaterT<Mesh>::decimate_to_faces(size_t _nv, size_t _nf, bool _only_selected) {
 
  if (!this->is_initialized())
    return 0;
 
  if (_nv >= mesh_.n_vertices() || _nf >= mesh_.n_faces())
    return 0;
 
  typename Mesh::VertexHandle vp;
  typename Mesh::HalfedgeHandle v0v1;
  typename Mesh::VertexVertexIter vv_it;
  typename Mesh::VertexFaceIter vf_it;
  size_t nv = mesh_.n_vertices();
  size_t nf = mesh_.n_faces();
  unsigned int n_collapses = 0;
 
  typedef std::vector<typename Mesh::VertexHandle> Support;
  typedef typename Support::iterator SupportIterator;
 
  Support support(15);
  SupportIterator s_it, s_end;
 
  // initialize heap
  HeapInterface HI(mesh_, priority_, heap_position_);
  #if (defined(_MSC_VER) && (_MSC_VER >= 1800)) || __cplusplus > 199711L || defined( __GXX_EXPERIMENTAL_CXX0X__ )
    heap_ = std::unique_ptr<DeciHeap>(new DeciHeap(HI));
  #else
    heap_ = std::auto_ptr<DeciHeap>(new DeciHeap(HI));
  #endif
  heap_->reserve(mesh_.n_vertices());
 
  for ( auto v_it : mesh_.vertices() ) {
    heap_->reset_heap_position(v_it);
    if (!mesh_.status(v_it).deleted()) {
      if (!_only_selected  || mesh_.status(v_it).selected() ) {
        heap_vertex(v_it);
      }
    }
  }
 
  const bool update_normals = mesh_.has_face_normals();
 
  // process heap
  while ((!heap_->empty()) && (_nv < nv) && (_nf < nf)) {
    // get 1st heap entry
    vp = heap_->front();
    v0v1 = mesh_.property(collapse_target_, vp);
    heap_->pop_front();
 
    // setup collapse info
    CollapseInfo ci(mesh_, v0v1);
 
    // check topological correctness AGAIN !
    if (!this->is_collapse_legal(ci))
      continue;
 
    // store support (= one ring of *vp)
    vv_it = mesh_.vv_iter(ci.v0);
    support.clear();
    for (; vv_it.is_valid(); ++vv_it)
      support.push_back(*vv_it);
 
    // adjust complexity in advance (need boundary status)
    ++n_collapses;
    --nv;
    if (mesh_.is_boundary(ci.v0v1) || mesh_.is_boundary(ci.v1v0))
      --nf;
    else
      nf -= 2;
 
    // pre-processing
    this->preprocess_collapse(ci);
 
    // perform collapse
    mesh_.collapse(v0v1);
 
    // update triangle normals
    if (update_normals)
    {
      vf_it = mesh_.vf_iter(ci.v1);
      for (; vf_it.is_valid(); ++vf_it)
        if (!mesh_.status(*vf_it).deleted())
          mesh_.set_normal(*vf_it, mesh_.calc_face_normal(*vf_it));
    }
 
    // post-process collapse
    this->postprocess_collapse(ci);
 
    // update heap (former one ring of decimated vertex)
    for (s_it = support.begin(), s_end = support.end(); s_it != s_end; ++s_it) {
      assert(!mesh_.status(*s_it).deleted());
      if (!_only_selected  || mesh_.status(*s_it).selected() )
        heap_vertex(*s_it);
    }
 
    // notify observer and stop if the observer requests it
    if (!this->notify_observer(n_collapses))
        return n_collapses;
  }
 
  // delete heap
  heap_.reset();
 
 
  // DON'T do garbage collection here! It's up to the application.
  return n_collapses;
}
 
//=============================================================================
}// END_NS_DECIMATER
} // END_NS_OPENMESH
//=============================================================================