ArrayKernelT_impl.hh

/* ========================================================================= *
 *                                                                           *
 *                               OpenMesh                                    *
 *           Copyright (c) 2001-2023, RWTH-Aachen University                 *
 *           Department of Computer Graphics and Multimedia                  *
 *                          All rights reserved.                             *
 *                            www.openmesh.org                               *
 *                                                                           *
 *---------------------------------------------------------------------------*
 * This file is part of OpenMesh.                                            *
 *---------------------------------------------------------------------------*
 *                                                                           *
 * Redistribution and use in source and binary forms, with or without        *
 * modification, are permitted provided that the following conditions        *
 * are met:                                                                  *
 *                                                                           *
 * 1. Redistributions of source code must retain the above copyright notice, *
 *    this list of conditions and the following disclaimer.                  *
 *                                                                           *
 * 2. Redistributions in binary form must reproduce the above copyright      *
 *    notice, this list of conditions and the following disclaimer in the    *
 *    documentation and/or other materials provided with the distribution.   *
 *                                                                           *
 * 3. Neither the name of the copyright holder nor the names of its          *
 *    contributors may be used to endorse or promote products derived from   *
 *    this software without specific prior written permission.               *
 *                                                                           *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS       *
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED *
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A           *
 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER *
 * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  *
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,       *
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR        *
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    *
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING      *
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS        *
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.              *
 *                                                                           *
 * ========================================================================= */
 
#define OPENMESH_ARRAY_KERNEL_C
 
//== INCLUDES =================================================================
 
#include <OpenMesh/Core/Mesh/ArrayKernel.hh>
 
//== NAMESPACES ===============================================================
 
namespace OpenMesh
{
 
//== IMPLEMENTATION ==========================================================
 
template<typename std_API_Container_VHandlePointer,
         typename std_API_Container_HHandlePointer,
         typename std_API_Container_FHandlePointer>
void ArrayKernel::garbage_collection(std_API_Container_VHandlePointer& vh_to_update,
                                     std_API_Container_HHandlePointer& hh_to_update,
                                     std_API_Container_FHandlePointer& fh_to_update,
                                     bool _v, bool _e, bool _f)
{
 
#ifdef DEBUG
  #ifndef OM_GARBAGE_NO_STATUS_WARNING
    if ( !this->has_vertex_status() )
      omerr() << "garbage_collection: No vertex status available. You can request it: mesh.request_vertex_status() or define OM_GARBAGE_NO_STATUS_WARNING to silence this warning." << std::endl;
    if ( !this->has_edge_status() )
      omerr() << "garbage_collection: No edge status available. You can request it: mesh.request_edge_status() or define OM_GARBAGE_NO_STATUS_WARNING to silence this warning." << std::endl;
    if ( !this->has_face_status() )
      omerr() << "garbage_collection: No face status available. You can request it: mesh.request_face_status() or define OM_GARBAGE_NO_STATUS_WARNING to silence this warning." << std::endl;
  #endif
#endif
 
  const bool track_vhandles = ( !vh_to_update.empty() );
  const bool track_hhandles = ( !hh_to_update.empty() );
  const bool track_fhandles = ( !fh_to_update.empty() );
 
  int i, i0, i1;
 
  int nV = int(n_vertices());
  int nE = int(n_edges());
  int nH = int(2*n_edges());
  int nF = (int(n_faces()));
 
  std::vector<VertexHandle>    vh_map;
  std::vector<HalfedgeHandle>  hh_map;
  std::vector<FaceHandle>      fh_map;
 
  std::map <int, int> vertex_inverse_map;
  std::map <int, int> halfedge_inverse_map;
  std::map <int, int> face_inverse_map;
 
  // setup handle mapping:
  vh_map.reserve(nV);
  for (i=0; i<nV; ++i) vh_map.push_back(VertexHandle(i));
 
  hh_map.reserve(nH);
  for (i=0; i<nH; ++i) hh_map.push_back(HalfedgeHandle(i));
 
  fh_map.reserve(nF);
  for (i=0; i<nF; ++i) fh_map.push_back(FaceHandle(i));
 
  // remove deleted vertices
  if (_v && n_vertices() > 0 && this->has_vertex_status() )
  {
    i0=0;  i1=nV-1;
 
    while (1)
    {
      // find 1st deleted and last un-deleted
      while (!status(VertexHandle(i0)).deleted() && i0 < i1)  ++i0;
      while ( status(VertexHandle(i1)).deleted() && i0 < i1)  --i1;
      if (i0 >= i1) break;
 
      // If we keep track of the vertex handles for updates,
      // we need to have the opposite direction
      if ( track_vhandles ) {
        vertex_inverse_map[i1] = i0;
        vertex_inverse_map[i0] = -1;
      }
 
      // swap
      std::swap(vertices_[i0], vertices_[i1]);
      std::swap(vh_map[i0],  vh_map[i1]);
      vprops_swap(i0, i1);
    };
 
    vertices_.resize(status(VertexHandle(i0)).deleted() ? i0 : i0+1);
    vprops_resize(n_vertices());
  }
 
 
  // remove deleted edges
  if (_e && n_edges() > 0 && this->has_edge_status() )
  {
    i0=0;  i1=nE-1;
 
    while (1)
    {
      // find 1st deleted and last un-deleted
      while (!status(EdgeHandle(i0)).deleted() && i0 < i1)  ++i0;
      while ( status(EdgeHandle(i1)).deleted() && i0 < i1)  --i1;
      if (i0 >= i1) break;
 
      // If we keep track of the vertex handles for updates,
      // we need to have the opposite direction
      if ( track_hhandles ) {
        halfedge_inverse_map[2*i1] = 2 * i0;
        halfedge_inverse_map[2*i0] = -1;
 
        halfedge_inverse_map[2*i1 + 1] = 2 * i0 + 1;
        halfedge_inverse_map[2*i0 + 1] = -1;
      }
 
      // swap
      std::swap(edges_[i0], edges_[i1]);
      std::swap(hh_map[2*i0], hh_map[2*i1]);
      std::swap(hh_map[2*i0+1], hh_map[2*i1+1]);
      eprops_swap(i0, i1);
      hprops_swap(2*i0,   2*i1);
      hprops_swap(2*i0+1, 2*i1+1);
    };
 
    edges_.resize(status(EdgeHandle(i0)).deleted() ? i0 : i0+1);
    eprops_resize(n_edges());
    hprops_resize(n_halfedges());
  }
 
 
  // remove deleted faces
  if (_f && n_faces() > 0 && this->has_face_status() )
  {
    i0=0;  i1=nF-1;
 
    while (1)
    {
      // find 1st deleted and last un-deleted
      while (!status(FaceHandle(i0)).deleted() && i0 < i1)  ++i0;
      while ( status(FaceHandle(i1)).deleted() && i0 < i1)  --i1;
      if (i0 >= i1) break;
 
      // If we keep track of the face handles for updates,
      // we need to have the opposite direction
      if ( track_fhandles ) {
        face_inverse_map[i1] = i0;
        face_inverse_map[i0] = -1;
      }
 
      // swap
      std::swap(faces_[i0], faces_[i1]);
      std::swap(fh_map[i0], fh_map[i1]);
      fprops_swap(i0, i1);
    };
 
    faces_.resize(status(FaceHandle(i0)).deleted() ? i0 : i0+1);
    fprops_resize(n_faces());
  }
 
 
  // update handles of vertices
  if (_e)
  {
    KernelVertexIter v_it(vertices_begin()), v_end(vertices_end());
    VertexHandle     vh;
 
    for (; v_it!=v_end; ++v_it)
    {
      vh = handle(*v_it);
      if (!is_isolated(vh))
      {
        set_halfedge_handle(vh, hh_map[halfedge_handle(vh).idx()]);
      }
    }
  }
 
  HalfedgeHandle hh;
  // update handles of halfedges
  for (KernelEdgeIter e_it(edges_begin()); e_it != edges_end(); ++e_it)
  {//in the first pass update the (half)edges vertices
    hh = halfedge_handle(handle(*e_it), 0);
    set_vertex_handle(hh, vh_map[to_vertex_handle(hh).idx()]);
    hh = halfedge_handle(handle(*e_it), 1);
    set_vertex_handle(hh, vh_map[to_vertex_handle(hh).idx()]);
  }
  for (KernelEdgeIter e_it(edges_begin()); e_it != edges_end(); ++e_it)
  {//in the second pass update the connectivity of the (half)edges
    hh = halfedge_handle(handle(*e_it), 0);
    set_next_halfedge_handle(hh, hh_map[next_halfedge_handle(hh).idx()]);
    if (!is_boundary(hh))
    {
      set_face_handle(hh, fh_map[face_handle(hh).idx()]);
    }
    hh = halfedge_handle(handle(*e_it), 1);
    set_next_halfedge_handle(hh, hh_map[next_halfedge_handle(hh).idx()]);
    if (!is_boundary(hh))
    {
      set_face_handle(hh, fh_map[face_handle(hh).idx()]);
    }
  }
 
  // update handles of faces
  if (_e)
  {
    KernelFaceIter  f_it(faces_begin()), f_end(faces_end());
    FaceHandle      fh;
 
    for (; f_it!=f_end; ++f_it)
    {
      fh = handle(*f_it);
      set_halfedge_handle(fh, hh_map[halfedge_handle(fh).idx()]);
    }
  }
 
  const int vertexCount   = int(vertices_.size());
  const int halfedgeCount = int(edges_.size() * 2);
  const int faceCount     = int(faces_.size());
 
  // Update the vertex handles in the vertex handle vector
  typename std_API_Container_VHandlePointer::iterator v_it(vh_to_update.begin()), v_it_end(vh_to_update.end());
  for(; v_it != v_it_end; ++v_it)
  {
 
    // Only changed vertices need to be considered
    if ( (*v_it)->idx() != vh_map[(*v_it)->idx()].idx() ) {
      *(*v_it) = VertexHandle(vertex_inverse_map[(*v_it)->idx()]);
 
      // Vertices above the vertex count have to be already mapped, or they are invalid now!
    } else if ( ((*v_it)->idx() >= vertexCount) && (vertex_inverse_map.find((*v_it)->idx()) == vertex_inverse_map.end()) ) {
      (*v_it)->invalidate();
    }
 
  }
 
  // Update the halfedge handles in the halfedge handle vector
  typename std_API_Container_HHandlePointer::iterator hh_it(hh_to_update.begin()), hh_it_end(hh_to_update.end());
  for(; hh_it != hh_it_end; ++hh_it)
  {
    // Only changed faces need to be considered
    if ( (*hh_it)->idx() != hh_map[(*hh_it)->idx()].idx() ) {
      *(*hh_it) = HalfedgeHandle(halfedge_inverse_map[(*hh_it)->idx()]);
 
      // Vertices above the face count have to be already mapped, or they are invalid now!
    } else if ( ((*hh_it)->idx() >= halfedgeCount) && (halfedge_inverse_map.find((*hh_it)->idx()) == halfedge_inverse_map.end()) ) {
      (*hh_it)->invalidate();
    }
 
  }
 
  // Update the face handles in the face handle vector
  typename std_API_Container_FHandlePointer::iterator fh_it(fh_to_update.begin()), fh_it_end(fh_to_update.end());
  for(; fh_it != fh_it_end; ++fh_it)
  {
 
    // Only changed faces need to be considered
    if ( (*fh_it)->idx() != fh_map[(*fh_it)->idx()].idx() ) {
      *(*fh_it) = FaceHandle(face_inverse_map[(*fh_it)->idx()]);
 
      // Vertices above the face count have to be already mapped, or they are invalid now!
    } else if ( ((*fh_it)->idx() >= faceCount) && (face_inverse_map.find((*fh_it)->idx()) == face_inverse_map.end()) ) {
      (*fh_it)->invalidate();
    }
 
  }
}
 
}