SR_rbo.hh

/* ========================================================================= *
 *                                                                           *
 *                               OpenMesh                                    *
 *           Copyright (c) 2001-2023, RWTH-Aachen University                 *
 *           Department of Computer Graphics and Multimedia                  *
 *                          All rights reserved.                             *
 *                            www.openmesh.org                               *
 *                                                                           *
 *---------------------------------------------------------------------------*
 * This file is part of OpenMesh.                                            *
 *---------------------------------------------------------------------------*
 *                                                                           *
 * Redistribution and use in source and binary forms, with or without        *
 * modification, are permitted provided that the following conditions        *
 * are met:                                                                  *
 *                                                                           *
 * 1. Redistributions of source code must retain the above copyright notice, *
 *    this list of conditions and the following disclaimer.                  *
 *                                                                           *
 * 2. Redistributions in binary form must reproduce the above copyright      *
 *    notice, this list of conditions and the following disclaimer in the    *
 *    documentation and/or other materials provided with the distribution.   *
 *                                                                           *
 * 3. Neither the name of the copyright holder nor the names of its          *
 *    contributors may be used to endorse or promote products derived from   *
 *    this software without specific prior written permission.               *
 *                                                                           *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS       *
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED *
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A           *
 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER *
 * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  *
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,       *
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR        *
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    *
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING      *
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS        *
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.              *
 *                                                                           *
 * ========================================================================= */
 
 
 
 
//=============================================================================
//
//  Helper Functions for binary reading / writing
//
//=============================================================================
 
#ifndef OPENMESH_SR_RBO_HH
#define OPENMESH_SR_RBO_HH
 
 
//== INCLUDES =================================================================
 
#include <OpenMesh/Core/System/config.h>
// -------------------- STL
#if defined(OM_CC_MIPS)
#  include <stdio.h> // size_t
#else
#  include <cstdio>  // size_t
#endif
#include <algorithm>
#include <typeinfo>
// -------------------- OpenMesh
#include <OpenMesh/Core/System/omstream.hh>
#include <OpenMesh/Core/IO/SR_types.hh>
#include <OpenMesh/Core/Utils/GenProg.hh>
 
//== NAMESPACES ===============================================================
 
namespace OpenMesh {
namespace IO {
 
 
//=============================================================================
 
 
 
 
//-----------------------------------------------------------------------------
 
template < size_t N > inline
void _reverse_byte_order_N(uint8_t* _val);
 
template <> inline
void _reverse_byte_order_N<1>(uint8_t* /*_val*/) { }
 
 
template <> inline
void _reverse_byte_order_N<2>(uint8_t* _val)
{
   _val[0] ^= _val[1]; _val[1] ^= _val[0]; _val[0] ^= _val[1];
}
 
 
template <> inline
void _reverse_byte_order_N<4>(uint8_t* _val)
{
   _val[0] ^= _val[3]; _val[3] ^= _val[0]; _val[0] ^= _val[3]; // 0 <-> 3
   _val[1] ^= _val[2]; _val[2] ^= _val[1]; _val[1] ^= _val[2]; // 1 <-> 2
}
 
 
template <> inline
void _reverse_byte_order_N<8>(uint8_t* _val)
{
   _val[0] ^= _val[7]; _val[7] ^= _val[0]; _val[0] ^= _val[7]; // 0 <-> 7
   _val[1] ^= _val[6]; _val[6] ^= _val[1]; _val[1] ^= _val[6]; // 1 <-> 6
   _val[2] ^= _val[5]; _val[5] ^= _val[2]; _val[2] ^= _val[5]; // 2 <-> 5
   _val[3] ^= _val[4]; _val[4] ^= _val[3]; _val[3] ^= _val[4]; // 3 <-> 4
}
 
 
template <> inline
void _reverse_byte_order_N<12>(uint8_t* _val)
{
   _val[0] ^= _val[11]; _val[11] ^= _val[0]; _val[0] ^= _val[11]; // 0 <-> 11
   _val[1] ^= _val[10]; _val[10] ^= _val[1]; _val[1] ^= _val[10]; // 1 <-> 10
   _val[2] ^= _val[ 9]; _val[ 9] ^= _val[2]; _val[2] ^= _val[ 9]; // 2 <->  9
   _val[3] ^= _val[ 8]; _val[ 8] ^= _val[3]; _val[3] ^= _val[ 8]; // 3 <->  8
   _val[4] ^= _val[ 7]; _val[ 7] ^= _val[4]; _val[4] ^= _val[ 7]; // 4 <->  7
   _val[5] ^= _val[ 6]; _val[ 6] ^= _val[5]; _val[5] ^= _val[ 6]; // 5 <->  6
}
 
 
template <> inline
void _reverse_byte_order_N<16>(uint8_t* _val)
{
   _reverse_byte_order_N<8>(_val);
   _reverse_byte_order_N<8>(_val+8);
   std::swap(*(uint64_t*)_val, *(((uint64_t*)_val)+1));
}
 
 
//-----------------------------------------------------------------------------
// wrapper for byte reordering
 
// reverting pointers makes no sense, hence forbid it.
template <typename T> inline T* reverse_byte_order(T* t);
// Should never reach this point. If so, then some operator were not
// overloaded. Especially check for IO::binary<> specialization on
// custom data types.
 
 
inline void compile_time_error__no_fundamental_type()
{
  // we should never reach this point
  assert(false);
}
 
// default action for byte reversal: cause an error to avoid
// surprising behaviour!
template <typename T> T& reverse_byte_order(  T& _t )
{
  omerr() << "Not defined for type " << typeid(T).name() << std::endl;
  compile_time_error__no_fundamental_type();
  return _t;
}
 
template <> inline bool&  reverse_byte_order(bool & _t) { return _t; }
template <> inline char&  reverse_byte_order(char & _t) { return _t; }
#if defined(OM_CC_GCC)
template <> inline signed char&  reverse_byte_order(signed char & _t) { return _t; }
#endif
template <> inline uchar& reverse_byte_order(uchar& _t) { return _t; }
 
// Instead do specializations for the necessary types
#define REVERSE_FUNDAMENTAL_TYPE( T ) \
  template <> inline T& reverse_byte_order( T&  _t ) {\
   _reverse_byte_order_N<sizeof(T)>( reinterpret_cast<uint8_t*>(&_t) ); \
   return _t; \
  }
 
// REVERSE_FUNDAMENTAL_TYPE(bool)
// REVERSE_FUNDAMENTAL_TYPE(char)
// REVERSE_FUNDAMENTAL_TYPE(uchar)
REVERSE_FUNDAMENTAL_TYPE(int16_t)
REVERSE_FUNDAMENTAL_TYPE(uint16_t)
// REVERSE_FUNDAMENTAL_TYPE(int)
// REVERSE_FUNDAMENTAL_TYPE(uint)
 
REVERSE_FUNDAMENTAL_TYPE(unsigned long)
REVERSE_FUNDAMENTAL_TYPE(int32_t)
REVERSE_FUNDAMENTAL_TYPE(uint32_t)
REVERSE_FUNDAMENTAL_TYPE(int64_t)
REVERSE_FUNDAMENTAL_TYPE(uint64_t)
REVERSE_FUNDAMENTAL_TYPE(float)
REVERSE_FUNDAMENTAL_TYPE(double)
REVERSE_FUNDAMENTAL_TYPE(long double)
 
#undef REVERSE_FUNDAMENTAL_TYPE
 
#if 0
 
#define REVERSE_VECTORT_TYPE( T ) \
  template <> inline T& reverse_byte_order(T& _v) {\
    for (size_t i; i< T::size_; ++i) \
      _reverse_byte_order_N< sizeof(T::value_type) >( reinterpret_cast<uint8_t*>(&_v[i])); \
    return _v; \
  }
 
#define REVERSE_VECTORT_TYPES( N )  \
  REVERSE_VECTORT_TYPE( Vec##N##c )  \
  REVERSE_VECTORT_TYPE( Vec##N##uc ) \
  REVERSE_VECTORT_TYPE( Vec##N##s )  \
  REVERSE_VECTORT_TYPE( Vec##N##us ) \
  REVERSE_VECTORT_TYPE( Vec##N##i )  \
  REVERSE_VECTORT_TYPE( Vec##N##ui ) \
  REVERSE_VECTORT_TYPE( Vec##N##f )  \
  REVERSE_VECTORT_TYPE( Vec##N##d )  \
 
REVERSE_VECTORT_TYPES(1)
REVERSE_VECTORT_TYPES(2)
REVERSE_VECTORT_TYPES(3)
REVERSE_VECTORT_TYPES(4)
REVERSE_VECTORT_TYPES(6)
 
#undef REVERSE_VECTORT_TYPES
#undef REVERSE_VECTORT_TYPE
 
#endif
 
template <typename T> inline
T reverse_byte_order(const T& a)
{
  compile_timer_error__const_means_const(a);
  return a;
}
 
 
 
 
//=============================================================================
} // namespace IO
} // namespace OpenMesh
//=============================================================================
#endif // OPENMESH_SR_RBO_HH defined
//=============================================================================