OpenMesh
MeshKernel.hh
1/* ========================================================================= *
2 * *
3 * OpenMesh *
4 * Copyright (c) 2001-2015, RWTH-Aachen University *
5 * Department of Computer Graphics and Multimedia *
6 * All rights reserved. *
7 * www.openmesh.org *
8 * *
9 *---------------------------------------------------------------------------*
10 * This file is part of OpenMesh. *
11 *---------------------------------------------------------------------------*
12 * *
13 * Redistribution and use in source and binary forms, with or without *
14 * modification, are permitted provided that the following conditions *
15 * are met: *
16 * *
17 * 1. Redistributions of source code must retain the above copyright notice, *
18 * this list of conditions and the following disclaimer. *
19 * *
20 * 2. Redistributions in binary form must reproduce the above copyright *
21 * notice, this list of conditions and the following disclaimer in the *
22 * documentation and/or other materials provided with the distribution. *
23 * *
24 * 3. Neither the name of the copyright holder nor the names of its *
25 * contributors may be used to endorse or promote products derived from *
26 * this software without specific prior written permission. *
27 * *
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS *
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED *
30 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A *
31 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER *
32 * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, *
33 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, *
34 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR *
35 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
36 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING *
37 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS *
38 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *
39 * *
40 * ========================================================================= */
41
42
43//=============================================================================
44//
45// Kernel Concept
46//
47//=============================================================================
48
49
50#error this file is for documentation purposes only
51
52
53//== NAMESPACES ===============================================================
54
55
56namespace OpenMesh {
57namespace Concepts {
58
59
60//== CLASS DEFINITION =========================================================
61
62
75template <class FinalMeshItems> class KernelT
76{
77public:
78
80
81
83 typedef typename FinalMeshItems::Vertex Vertex;
84 typedef typename FinalMeshItems::Halfedge Halfedge;
85 typedef typename FinalMeshItems::Edge Edge;
86 typedef typename FinalMeshItems::Face Face;
87 typedef typename FinalMeshItems::Point Point;
88 typedef typename FinalMeshItems::Scalar Scalar;
90 typedef typename FinalMeshItems::Color Color;
91 typedef typename FinalMeshItems::TexCoord TexCoord;
92 typedef typename FinalMeshItems::VertexHandle VertexHandle;
93 typedef typename FinalMeshItems::HalfedgeHandle HalfedgeHandle;
94 typedef typename FinalMeshItems::EdgeHandle EdgeHandle;
95 typedef typename FinalMeshItems::FaceHandle FaceHandle;
96
98
99
101
102
103 typedef SomeIterator KernelVertexIter;
104 typedef SomeIterator KernelConstVertexIter;
105 typedef SomeIterator KernelEdgeIter;
106 typedef SomeIterator KernelConstEdgeIter;
107 typedef SomeIterator KernelFaceIter;
108 typedef SomeIterator KernelConstFaceIter;
110
112
113
115
119
121 KernelT& operator=(const KernelT& _rhs);
122
123
136 void reserve( size_t _n_vertices,
137 size_t _n_edges,
138 size_t _n_faces );
139
140
142
143
144 const Vertex& vertex(VertexHandle _h) const { return deref(_h); }
145 Vertex& vertex(VertexHandle _h) { return deref(_h); }
146 const Halfedge& halfedge(HalfedgeHandle _h) const { return deref(_h); }
147 Halfedge& halfedge(HalfedgeHandle _h) { return deref(_h); }
148 const Edge& edge(EdgeHandle _h) const { return deref(_h); }
149 Edge& edge(EdgeHandle _h) { return deref(_h); }
150 const Face& face(FaceHandle _h) const { return deref(_h); }
151 Face& face(FaceHandle _h) { return deref(_h); }
153
154
156
157
158 VertexHandle handle(const Vertex& _v) const;
159 HalfedgeHandle handle(const Halfedge& _he) const;
160 EdgeHandle handle(const Edge& _e) const;
161 FaceHandle handle(const Face& _f) const;
163
164
166
167
168 VertexHandle vertex_handle(unsigned int _i) const;
169 HalfedgeHandle halfedge_handle(unsigned int _i) const;
170 EdgeHandle edge_handle(unsigned int _i) const;
171 FaceHandle face_handle(unsigned int _i) const;
173
174
176
177
180 void clear();
181
185 void clean();
186
197
201 void remove_last_vertex() { vertices_.pop_back(); }
205 void remove_last_edge() { edges_.pop_back(); }
209 void remove_last_face() { faces_.pop_back(); }
210
212
213
214
215
217
218
219 size_t n_vertices() const;
221 size_t n_halfedges() const;
223 size_t n_edges() const;
225 size_t n_faces() const;
227 bool vertices_empty() const;
229 bool halfedges_empty() const;
231 bool edges_empty() const;
233 bool faces_empty() const;
235
236
237
239
240
245 const Point& point(VertexHandle _vh) const;
247 const Point& point(const Vertex& _v) const;
249 void set_point(VertexHandle _vh, const Point& _p);
251 void set_point(Vertex& _v, const Point& _p);
253
254
255
256
258
259
290
291
292
294
295
296 HalfedgeHandle halfedge_handle(EdgeHandle _eh, unsigned int _i) const;
298
299
300
302
303
308
309
310public: // Standard Property Management
311
313
314
315 // vertex
316 const Point& point(VertexHandle _vh) const;
317 void set_point(VertexHandle _vh, const Point& _p);
319
320 const Normal& normal(VertexHandle _vh) const;
321 void set_normal(VertexHandle _vh, const Normal& _n);
322
323 const Normal& normal(HalfedgeHandle _heh) const;
324 void set_normal(HalfedgeHandle _heh, const Normal& _n);
325
326 const Color& color(VertexHandle _vh) const;
327 void set_color(VertexHandle _vh, const Color& _c);
328
331
334
337
340
343
346
347 const StatusInfo& status(VertexHandle _vh) const;
348 StatusInfo& status(VertexHandle _vh);
349
350 // halfedge
351 const StatusInfo& status(HalfedgeHandle _vh) const;
352 StatusInfo& status(HalfedgeHandle _vh);
353
354 const Color& color(HalfedgeHandle _heh) const;
355 void set_color(HalfedgeHandle _heh, const Color& _c);
356
357 // edge
358 const Color& color(EdgeHandle _eh) const;
359 void set_color(EdgeHandle _eh, const Color& _c);
360
361
362 const StatusInfo& status(EdgeHandle _vh) const;
363 StatusInfo& status(EdgeHandle _vh);
364
365 // face
366 const Normal& normal(FaceHandle _fh) const;
367 void set_normal(FaceHandle _fh, const Normal& _n);
368
369 const Color& color(FaceHandle _fh) const;
370 void set_color(FaceHandle _fh, const Color& _c);
371
372 const StatusInfo& status(FaceHandle _vh) const;
373 StatusInfo& status(FaceHandle _vh);
374
376
378
379
386
393
396
402
404
405
412
419
422
428
430
431
432 bool has_vertex_normals() const;
433 bool has_vertex_colors() const;
437 bool has_vertex_status() const;
438
445
446 bool has_edge_status() const;
447 bool has_edge_colors() const;
448
449 bool has_face_normals() const;
450 bool has_face_colors() const;
451 bool has_face_status() const;
454
455public: // Property Management
456
458
460
461
463 template <typename T> void add_property( [VEHFM]PropHandleT<T>& _ph,
464 const std::string& _name = "" );
466
468
469
470 template <typename T> void remove_property( [VEHFM]PropHandleT<T>& );
472
474
475
476 template <typename T>
477 bool get_property_handle( [VEHFM]PropHandleT<T>& ph, const std::string& _n ) const;
479
481
482
483 template <typename T> PropertyT<T>& property( [VEHF]PropHandleT<T> _ph );
484 template <typename T> const PropertyT<T>& property( [VEHF]PropHandleT<T> _ph ) const;
485 template <typename T> PropertyT<T>& mproperty( MPropHandleT<T> _ph );
486 template <typename T> const PropertyT<T>& mproperty( MPropHandleT<T> _ph ) const;
488
490
491
493 template <typename T>
495 template <typename T>
496 const T& property( VPropHandleT<T> _ph, VertexHandle _vh ) const;
497
498 template <typename T>
500 template <typename T>
501 const T& property( EPropHandleT<T> _ph, EdgeHandle _vh ) const;
502
503 template <typename T>
505 template <typename T>
506 const T& property( HPropHandleT<T> _ph, HalfedgeHandle _vh ) const;
507
508 template <typename T>
510 template <typename T>
511 const T& property( FPropHandleT<T> _ph, FaceHandle _vh ) const;
512
513 template <typename T>
515 template <typename T>
516 const T& property( MPropHandleT<T> _ph ) const;
517
519
520public:
521
522
524
525
540 VertexHandle _end_vertex_handle);
541
550
551
552 // --- iterators ---
553
555
556
571
572
573
574private:
575
576
577 // --- private functions ---
578
580 KernelT(const KernelT& _rhs);
581};
582};
583
584
585//=============================================================================
586} // namespace Concepts
587} // namespace OpenMesh
588//=============================================================================
Contains all the mesh ingredients like the polygonal mesh, the triangle mesh, different mesh kernels ...
Definition: MeshItems.hh:59
@ Normal
Add normals to mesh item (vertices/faces)
Definition: Attributes.hh:82
@ TexCoord2D
Add 2D texture coordinates (vertices, halfedges)
Definition: Attributes.hh:87
@ TexCoord1D
Add 1D texture coordinates (vertices, halfedges)
Definition: Attributes.hh:86
@ TexCoord3D
Add 3D texture coordinates (vertices, halfedges)
Definition: Attributes.hh:88
@ Color
Add colors to mesh item (vertices/faces/edges)
Definition: Attributes.hh:83
This class describes the minimum interface a mesh kernel has to implement (because the resulting mesh...
Definition: MeshKernel.hh:76
HalfedgeHandle prev_halfedge_handle(HalfedgeHandle _heh) const
Get the previous halfedge of the given halfedge.
bool has_halfedge_colors() const
Is property available?
void set_color(FaceHandle _fh, const Color &_c)
Set color.
void request_vertex_texcoords2D()
Request property.
void set_halfedge_handle(FaceHandle _fh, HalfedgeHandle _heh)
Set one halfedge of the face.
void request_halfedge_texcoords3D()
Request property.
bool has_face_normals() const
Is property available?
HalfedgeHandle halfedge_handle(VertexHandle _vh) const
Get an outgoing halfedge of a given vertex.
const TexCoord2D & texcoord2D(HalfedgeHandle _hh) const
Get texture coordinate of the to vertex for the current face (per face per vertex texcoords)
void request_halfedge_colors()
Request property.
void remove_last_face()
Remove the last face imidiately, i.e.
Definition: MeshKernel.hh:209
void request_vertex_normals()
Request property.
void set_normal(HalfedgeHandle _heh, const Normal &_n)
Set normal of the to vertex of the given Halfedge (per face per vertex normals)
void release_halfedge_colors()
Remove property.
const Normal & normal(FaceHandle _fh) const
Get normal.
T & property(MPropHandleT< T > _ph)
Get value for item represented by the handle.
void set_point(Vertex &_v, const Point &_p)
Set the coordinate of a vertex.
size_t n_edges() const
Returns number of edges.
PropertyT< T > & property([VEHF]PropHandleT< T > _ph)
Get property.
const TexCoord2D & texcoord2D(VertexHandle _vh) const
Get texture coordinate.
FinalMeshItems::Scalar Scalar
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:88
void request_halfedge_status()
Request property.
SomeIterator KernelFaceIter
This type depends on the container type in use.
Definition: MeshKernel.hh:107
void set_texcoord3D(HalfedgeHandle _hh, const TexCoord3D &_t)
Set texture coordinate of the to vertex of the given Halfedge (per face per vertex texcoords)
VertexHandle vertex_handle(unsigned int _i) const
Get the i'th item.
FinalMeshItems::Color Color
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:90
HalfedgeHandle ccw_rotated_halfedge_handle(HalfedgeHandle _heh) const
Counter-clockwise rotate the given halfedge around its from vertex.
const Normal & normal(HalfedgeHandle _heh) const
Get normal of the to vertex of the given Halfedge (per face per vertex normals)
KernelFaceIter faces_begin()
Kernel item iterator.
void release_halfedge_texcoords3D()
Remove property.
bool has_edge_colors() const
Is property available?
SomeIterator KernelConstVertexIter
This type depends on the container type in use.
Definition: MeshKernel.hh:104
void request_edge_status()
Request property.
void clear()
Delete all items, i.e.
KernelConstFaceIter faces_end() const
Kernel item iterator.
void release_vertex_colors()
Remove property.
const TexCoord3D & texcoord3D(HalfedgeHandle _hh) const
Get texture coordinate of the to vertex for the current face (per face per vertex texcoords)
SomeIterator KernelEdgeIter
This type depends on the container type in use.
Definition: MeshKernel.hh:105
void remove_last_vertex()
Remove the last vertex imidiately, i.e.
Definition: MeshKernel.hh:201
FaceHandle new_face()
Adding a new face.
void set_texcoord2D(HalfedgeHandle _hh, const TexCoord2D &_t)
Set texture coordinate of the to vertex of the given Halfedge (per face per vertex texcoords)
SomeIterator KernelConstEdgeIter
This type depends on the container type in use.
Definition: MeshKernel.hh:106
void release_face_texture_index()
Remove property.
const StatusInfo & status(FaceHandle _vh) const
Get status.
void release_face_normals()
Remove property.
bool vertices_empty() const
Is the vertex container empty?
FinalMeshItems::EdgeHandle EdgeHandle
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:94
void release_vertex_normals()
Remove property.
void set_color(VertexHandle _vh, const Color &_c)
Set color.
FaceHandle face_handle(unsigned int _i) const
Get the i'th item.
void request_face_colors()
Request property.
const Color & color(HalfedgeHandle _heh) const
Get color.
void release_halfedge_texcoords2D()
Remove property.
const Edge & edge(EdgeHandle _h) const
Translate handle to item (see also OpenMesh::PolyMeshT::deref())
Definition: MeshKernel.hh:148
void request_face_texture_index()
Request property.
KernelConstFaceIter faces_begin() const
Kernel item iterator.
HalfedgeHandle new_edge(VertexHandle _start_vertex_handle, VertexHandle _end_vertex_handle)
Add a new edge from _start_vertex_handle to _end_vertex_handle.
void set_texcoord1D(VertexHandle _vh, const TexCoord1D &_t)
Set texture coordinate.
KernelVertexIter vertices_end()
Kernel item iterator.
void request_halfedge_texcoords2D()
Request property.
const Color & color(VertexHandle _vh) const
Get color.
void request_vertex_status()
Request property.
HalfedgeHandle halfedge_handle(EdgeHandle _eh, unsigned int _i) const
Get the first or second halfedge of the given edge.
FinalMeshItems::TexCoord TexCoord
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:91
void add_property([VEHFM]PropHandleT< T > &_ph, const std::string &_name="")
Add property.
const Point & point(VertexHandle _vh) const
Get the coordinate of a vertex.
HalfedgeHandle halfedge_handle(FaceHandle _fh) const
Get a halfedge belonging to the face.
void request_vertex_colors()
Request property.
VertexHandle new_vertex(const Vertex &_v)
Add a new vertex (copied from the given one).
T & property(HPropHandleT< T > _ph, HalfedgeHandle _vh)
Get value for item represented by the handle.
const PropertyT< T > & property([VEHF]PropHandleT< T > _ph) const
Get property.
EdgeHandle edge_handle(HalfedgeHandle _heh) const
Get the edge the current halfedge it contained in.
const T & property(HPropHandleT< T > _ph, HalfedgeHandle _vh) const
Get value for item represented by the handle.
T & property(EPropHandleT< T > _ph, EdgeHandle _vh)
Get value for item represented by the handle.
const StatusInfo & status(HalfedgeHandle _vh) const
Get status.
bool get_property_handle([VEHFM]PropHandleT< T > &ph, const std::string &_n) const
Get property handle by name.
VertexHandle new_vertex(const Point &_p)
Add a new vertex with a given point coordinate.
void release_vertex_texcoords1D()
Remove property.
StatusInfo & status(VertexHandle _vh)
Get status.
const Halfedge & halfedge(HalfedgeHandle _h) const
Translate handle to item (see also OpenMesh::PolyMeshT::deref())
Definition: MeshKernel.hh:146
SomeIterator KernelConstFaceIter
This type depends on the container type in use.
Definition: MeshKernel.hh:108
FaceHandle face_handle(HalfedgeHandle _heh) const
Get the face the halfedge belongs to.
void release_vertex_status()
Remove property.
HalfedgeHandle halfedge_handle(unsigned int _i) const
Get the i'th item.
HalfedgeHandle opposite_halfedge_handle(HalfedgeHandle _heh) const
Get the opposite halfedge.
StatusInfo & status(FaceHandle _vh)
Get status.
HalfedgeHandle handle(const Halfedge &_he) const
Translate item to handle.
KernelConstVertexIter vertices_begin() const
Kernel item iterator.
FinalMeshItems::Halfedge Halfedge
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:84
const StatusInfo & status(VertexHandle _vh) const
Get status.
void garbage_collection()
Remove all items that are marked as deleted from the corresponding containers.
void set_halfedge_handle(VertexHandle _vh, HalfedgeHandle _heh)
Set the outgoing halfedge handle of a given vertex.
void release_edge_colors()
Remove property.
bool has_face_texture_index() const
Is property available?
FaceHandle handle(const Face &_f) const
Translate item to handle.
size_t n_vertices() const
Returns number of vertices.
KernelT()
Default constructor.
Definition: MeshKernel.hh:114
SomeIterator KernelVertexIter
This type depends on the container type in use.
Definition: MeshKernel.hh:103
FaceHandle new_face(const Face &_f)
Adding a new face (copied from a _f).
KernelFaceIter faces_end()
Kernel item iterator.
bool has_vertex_colors() const
Is property available?
bool has_halfedge_status() const
Is property available?
KernelConstEdgeIter edges_begin() const
Kernel item iterator.
HalfedgeHandle cw_rotated_halfedge_handle(HalfedgeHandle _heh) const
Clockwise rotate the given halfedge around its from vertex.
KernelT & operator=(const KernelT &_rhs)
Assignment operator.
const TexCoord1D & texcoord1D(VertexHandle _vh) const
Get texture coordinate.
void release_face_status()
Remove property.
StatusInfo & status(EdgeHandle _vh)
Get status.
KernelConstVertexIter vertices_end() const
Kernel item iterator.
VertexHandle new_vertex()
Add a new (default) vertex.
KernelEdgeIter edges_begin()
Kernel item iterator.
void request_vertex_texcoords1D()
Request property.
void set_texcoord1D(HalfedgeHandle _hh, const TexCoord1D &_t)
Set texture coordinate of the to vertex of the given Halfedge (per face per vertex texcoords)
void release_halfedge_normals()
Remove property.
void request_vertex_texcoords3D()
Request property.
T & property(VPropHandleT< T > _ph, VertexHandle _vh)
Get value for item represented by the handle.
KernelConstEdgeIter edges_end() const
Kernel item iterator.
bool has_vertex_normals() const
Is property available?
EdgeHandle edge_handle(unsigned int _i) const
Get the i'th item.
bool has_face_status() const
Is property available?
void release_face_colors()
Remove property.
Halfedge & halfedge(HalfedgeHandle _h)
Translate handle to item (see also OpenMesh::PolyMeshT::deref())
Definition: MeshKernel.hh:147
StatusInfo & status(HalfedgeHandle _vh)
Get status.
T & property(FPropHandleT< T > _ph, FaceHandle _vh)
Get value for item represented by the handle.
PropertyT< T > & mproperty(MPropHandleT< T > _ph)
Get property.
bool has_halfedge_normals() const
Is property available?
void release_edge_status()
Remove property.
void set_vertex_handle(HalfedgeHandle _heh, VertexHandle _vh)
Set the to-vertex-handle of the halfedge.
void set_face_handle(HalfedgeHandle _heh, FaceHandle _fh)
Set the face the halfedge belongs to.
bool has_halfedge_texcoords1D() const
Is property available?
FinalMeshItems::FaceHandle FaceHandle
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:95
void set_next_halfedge_handle(HalfedgeHandle _heh, HalfedgeHandle _nheh)
Set the next halfedge handle.
bool has_edge_status() const
Is property available?
const TexCoord3D & texcoord3D(VertexHandle _vh) const
Get texture coordinate.
void set_normal(FaceHandle _fh, const Normal &_n)
Set normal.
FinalMeshItems::HalfedgeHandle HalfedgeHandle
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:93
void set_point(VertexHandle _vh, const Point &_p)
Set the coordinate of a vertex.
bool edges_empty() const
Is the edge container empty?
Point & point(VertexHandle _vh)
Convenience function.
void release_halfedge_status()
Remove property.
void request_face_status()
Request property.
void set_normal(VertexHandle _vh, const Normal &_n)
Set normal.
void release_halfedge_texcoords1D()
Remove property.
void reserve(size_t _n_vertices, size_t _n_edges, size_t _n_faces)
Reserve memory for vertices, edges, faces.
void clean()
Delete all items, i.e.
KernelVertexIter vertices_begin()
Kernel item iterator.
VertexHandle handle(const Vertex &_v) const
Translate item to handle.
bool has_face_colors() const
Is property available?
Vertex & vertex(VertexHandle _h)
Translate handle to item (see also OpenMesh::PolyMeshT::deref())
Definition: MeshKernel.hh:145
const Point & point(const Vertex &_v) const
Get the coordinate of a vertex.
bool has_halfedge_texcoords3D() const
Is property available?
const Vertex & vertex(VertexHandle _h) const
Translate handle to item (see also OpenMesh::PolyMeshT::deref())
Definition: MeshKernel.hh:144
const Face & face(FaceHandle _h) const
Translate handle to item (see also OpenMesh::PolyMeshT::deref())
Definition: MeshKernel.hh:150
const T & property(VPropHandleT< T > _ph, VertexHandle _vh) const
Get value for item represented by the handle.
void release_vertex_texcoords3D()
Remove property.
void set_color(EdgeHandle _eh, const Color &_c)
Set color.
HalfedgeHandle next_halfedge_handle(HalfedgeHandle _heh) const
Get the next halfedge handle.
EdgeHandle handle(const Edge &_e) const
Translate item to handle.
bool has_vertex_texcoords1D() const
Is property available?
bool has_vertex_status() const
Is property available?
FinalMeshItems::VertexHandle VertexHandle
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:92
bool halfedges_empty() const
Is the halfedge container empty (should be the same as edges_empty()).
VertexHandle from_vertex_handle(HalfedgeHandle _heh) const
Get the vertex the halfedge starts from (implemented as to-handle of the opposite halfedge,...
const T & property(EPropHandleT< T > _ph, EdgeHandle _vh) const
Get value for item represented by the handle.
void remove_last_edge()
Remove the last edge imidiately, i.e.
Definition: MeshKernel.hh:205
bool has_vertex_texcoords2D() const
Is property available?
void remove_property([VEHFM]PropHandleT< T > &)
Remove property.
const Color & color(EdgeHandle _eh) const
Get color.
void set_texcoord2D(VertexHandle _vh, const TexCoord2D &_t)
Set texture coordinate.
void set_color(HalfedgeHandle _heh, const Color &_c)
Set color.
const StatusInfo & status(EdgeHandle _vh) const
Get status.
Face & face(FaceHandle _h)
Translate handle to item (see also OpenMesh::PolyMeshT::deref())
Definition: MeshKernel.hh:151
FinalMeshItems::Point Point
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:87
FinalMeshItems::Normal Normal
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:89
void release_vertex_texcoords2D()
Remove property.
bool faces_empty() const
Is the face container empty?
void request_halfedge_normals()
Request property.
bool has_halfedge_texcoords2D() const
Is property available?
FinalMeshItems::Edge Edge
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:85
Edge & edge(EdgeHandle _h)
Translate handle to item (see also OpenMesh::PolyMeshT::deref())
Definition: MeshKernel.hh:149
size_t n_faces() const
Returns number of faces.
const T & property(FPropHandleT< T > _ph, FaceHandle _vh) const
Get value for item represented by the handle.
const Normal & normal(VertexHandle _vh) const
Get normal.
FinalMeshItems::Vertex Vertex
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:83
KernelEdgeIter edges_end()
Kernel item iterator.
void request_edge_colors()
Request property.
const TexCoord1D & texcoord1D(HalfedgeHandle _hh) const
Get texture coordinate of the to vertex for the current face (per face per vertex texcoords)
void request_halfedge_texcoords1D()
Request property.
size_t n_halfedges() const
Returns number of halfedges (should be 2*n_edges())
FinalMeshItems::Face Face
Derive this type from the FinalMeshItems.
Definition: MeshKernel.hh:86
const PropertyT< T > & mproperty(MPropHandleT< T > _ph) const
Get property.
const Color & color(FaceHandle _fh) const
Get color.
void request_face_normals()
Request property.
bool has_vertex_texcoords3D() const
Is property available?
const T & property(MPropHandleT< T > _ph) const
Get value for item represented by the handle.
VertexHandle to_vertex_handle(HalfedgeHandle _heh) const
Get the vertex the halfedge points to.
void set_texcoord3D(VertexHandle _vh, const TexCoord3D &_t)
Set texture coordinate.
Default property class for any type T.
Definition: Property.hh:93
Handle representing a vertex property.
Definition: Property.hh:417
Handle representing a halfedge property.
Definition: Property.hh:432
Handle representing an edge property.
Definition: Property.hh:447
Handle representing a face property.
Definition: Property.hh:462
Handle representing a mesh property.
Definition: Property.hh:477

Project OpenMesh, ©  Visual Computing Institute, RWTH Aachen. Documentation generated using doxygen .