OpenMesh
PLYWriter.hh
1 /* ========================================================================= *
2  * *
3  * OpenMesh *
4  * Copyright (c) 2001-2015, RWTH-Aachen University *
5  * Department of Computer Graphics and Multimedia *
6  * All rights reserved. *
7  * www.openmesh.org *
8  * *
9  *---------------------------------------------------------------------------*
10  * This file is part of OpenMesh. *
11  *---------------------------------------------------------------------------*
12  * *
13  * Redistribution and use in source and binary forms, with or without *
14  * modification, are permitted provided that the following conditions *
15  * are met: *
16  * *
17  * 1. Redistributions of source code must retain the above copyright notice, *
18  * this list of conditions and the following disclaimer. *
19  * *
20  * 2. Redistributions in binary form must reproduce the above copyright *
21  * notice, this list of conditions and the following disclaimer in the *
22  * documentation and/or other materials provided with the distribution. *
23  * *
24  * 3. Neither the name of the copyright holder nor the names of its *
25  * contributors may be used to endorse or promote products derived from *
26  * this software without specific prior written permission. *
27  * *
28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS *
29  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED *
30  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A *
31  * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER *
32  * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, *
33  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, *
34  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR *
35  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
36  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING *
37  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS *
38  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *
39  * *
40  * ========================================================================= */
41 
42 /*===========================================================================*\
43  * *
44  * $Revision$ *
45  * $Date$ *
46  * *
47 \*===========================================================================*/
48 
49 
50 //=============================================================================
51 //
52 // Implements a writer module for PLY files
53 //
54 //=============================================================================
55 
56 
57 #ifndef __PLYWRITER_HH__
58 #define __PLYWRITER_HH__
59 
60 
61 //=== INCLUDES ================================================================
62 
63 #include <string>
64 #include <ostream>
65 #include <vector>
66 
67 #include <OpenMesh/Core/System/config.h>
68 #include <OpenMesh/Core/Utils/SingletonT.hh>
69 #include <OpenMesh/Core/IO/exporter/BaseExporter.hh>
70 #include <OpenMesh/Core/IO/writer/BaseWriter.hh>
71 #include <OpenMesh/Core/Utils/GenProg.hh>
72 
73 
74 //== NAMESPACES ===============================================================
75 
76 
77 namespace OpenMesh {
78 namespace IO {
79 
80 
81 //=== IMPLEMENTATION ==========================================================
82 
83 
93 class OPENMESHDLLEXPORT _PLYWriter_ : public BaseWriter
94 {
95 public:
96 
97  _PLYWriter_();
98 
100  virtual ~_PLYWriter_() {};
101 
102  std::string get_description() const { return "PLY polygon file format"; }
103  std::string get_extensions() const { return "ply"; }
104 
105  bool write(const std::string&, BaseExporter&, Options, std::streamsize _precision = 6) const;
106 
107  bool write(std::ostream&, BaseExporter&, Options, std::streamsize _precision = 6) const;
108 
109  size_t binary_size(BaseExporter& _be, Options _opt) const;
110 
111  enum ValueType {
112  Unsupported = 0,
113  ValueTypeFLOAT32, ValueTypeFLOAT,
114  ValueTypeINT32, ValueTypeINT , ValueTypeUINT,
115  ValueTypeUCHAR, ValueTypeCHAR, ValueTypeUINT8,
116  ValueTypeUSHORT, ValueTypeSHORT,
117  ValueTypeDOUBLE
118  };
119 
120 private:
121  mutable Options options_;
122 
123  struct CustomProperty
124  {
125  ValueType type;
126  const BaseProperty* property;
127  CustomProperty(const BaseProperty* const _p):type(Unsupported),property(_p){}
128  };
129 
130  const char* nameOfType_[12];
131 
133  std::vector<CustomProperty> writeCustomTypeHeader(std::ostream& _out, BaseKernel::const_prop_iterator _begin, BaseKernel::const_prop_iterator _end) const;
134  template<bool binary>
135  void write_customProp(std::ostream& _our, const CustomProperty& _prop, size_t _index) const;
136  template<typename T>
137  void writeProxy(ValueType _type, std::ostream& _out, T _value, OpenMesh::GenProg::TrueType /*_binary*/) const
138  {
139  writeValue(_type, _out, _value);
140  }
141  template<typename T>
142  void writeProxy(ValueType _type, std::ostream& _out, T _value, OpenMesh::GenProg::FalseType /*_binary*/) const
143  {
144  _out << " " << _value;
145  }
146 
147 protected:
148  void writeValue(ValueType _type, std::ostream& _out, signed char value) const;
149  void writeValue(ValueType _type, std::ostream& _out, unsigned char value) const;
150  void writeValue(ValueType _type, std::ostream& _out, short value) const;
151  void writeValue(ValueType _type, std::ostream& _out, unsigned short value) const;
152  void writeValue(ValueType _type, std::ostream& _out, int value) const;
153  void writeValue(ValueType _type, std::ostream& _out, unsigned int value) const;
154  void writeValue(ValueType _type, std::ostream& _out, float value) const;
155  void writeValue(ValueType _type, std::ostream& _out, double value) const;
156 
157  bool write_ascii(std::ostream& _out, BaseExporter&, Options) const;
158  bool write_binary(std::ostream& _out, BaseExporter&, Options) const;
160  void write_header(std::ostream& _out, BaseExporter& _be, Options& _opt, std::vector<CustomProperty>& _ovProps, std::vector<CustomProperty>& _ofProps) const;
161 };
162 
163 
164 //== TYPE DEFINITION ==========================================================
165 
166 
169 OPENMESHDLLEXPORT _PLYWriter_& PLYWriter();
170 
171 
172 //=============================================================================
173 } // namespace IO
174 } // namespace OpenMesh
175 //=============================================================================
176 #endif
177 //=============================================================================
virtual ~_PLYWriter_()
Destructor.
Definition: PLYWriter.hh:100
Base class for all writer modules.
Definition: BaseWriter.hh:88
std::string get_extensions() const
Return file format&#39;s extension.
Definition: PLYWriter.hh:103
Implementation of the PLY format writer.
Definition: PLYWriter.hh:93
_PLYWriter_ __PLYWriterInstance
Declare the single entity of the PLY writer.
Definition: PLYWriter.cc:72
std::string get_description() const
Return short description of the supported file format.
Definition: PLYWriter.hh:102
size_t binary_size(const Mesh &_mesh, const std::string &_ext, Options _opt=Options::Default)
Get binary size of data.
Definition: MeshIO.hh:260
Set options for reader/writer modules.
Definition: Options.hh:95
Base class for exporter modules.
Definition: BaseExporter.hh:89
Abstract class defining the basic interface of a dynamic property.
Definition: BaseProperty.hh:65
Contains all the mesh ingredients like the polygonal mesh, the triangle mesh, different mesh kernels ...
Definition: MeshItems.hh:64

Project OpenMesh, ©  Computer Graphics Group, RWTH Aachen. Documentation generated using doxygen .