OpenMesh
 All Classes Namespaces Files Functions Variables Typedefs Enumerations Enumerator Friends Macros Modules Pages
CompositeTraits.hh
Go to the documentation of this file.
1 /* ========================================================================= *
2  * *
3  * OpenMesh *
4  * Copyright (c) 2001-2015, RWTH-Aachen University *
5  * Department of Computer Graphics and Multimedia *
6  * All rights reserved. *
7  * www.openmesh.org *
8  * *
9  *---------------------------------------------------------------------------*
10  * This file is part of OpenMesh. *
11  *---------------------------------------------------------------------------*
12  * *
13  * Redistribution and use in source and binary forms, with or without *
14  * modification, are permitted provided that the following conditions *
15  * are met: *
16  * *
17  * 1. Redistributions of source code must retain the above copyright notice, *
18  * this list of conditions and the following disclaimer. *
19  * *
20  * 2. Redistributions in binary form must reproduce the above copyright *
21  * notice, this list of conditions and the following disclaimer in the *
22  * documentation and/or other materials provided with the distribution. *
23  * *
24  * 3. Neither the name of the copyright holder nor the names of its *
25  * contributors may be used to endorse or promote products derived from *
26  * this software without specific prior written permission. *
27  * *
28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS *
29  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED *
30  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A *
31  * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER *
32  * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, *
33  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, *
34  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR *
35  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
36  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING *
37  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS *
38  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *
39  * *
40  * ========================================================================= */
41 
42 /*===========================================================================*\
43  * *
44  * $Revision$ *
45  * $Date$ *
46  * *
47 \*===========================================================================*/
48 
53 //=============================================================================
54 //
55 // CLASS Traits
56 //
57 //=============================================================================
58 
59 #ifndef OPENMESH_SUBDIVIDER_UNIFORM_COMPOSITETRAITS_HH
60 #define OPENMESH_SUBDIVIDER_UNIFORM_COMPOSITETRAITS_HH
61 
62 
63 //== INCLUDES =================================================================
64 
65 //#include "Config.hh"
66 // --------------------
69 
70 
71 //== NAMESPACE ================================================================
72 
73 namespace OpenMesh { // BEGIN_NS_OPENMESH
74 namespace Subdivider { // BEGIN_NS_DECIMATER
75 namespace Uniform { // BEGIN_NS_UNIFORM
76 
77 
78 //== CLASS DEFINITION =========================================================
79 
80 
85 {
86  FaceAttributes( OpenMesh::Attributes::Normal );
87 
88  VertexAttributes( OpenMesh::Attributes::Normal );
89 
90  //HalfedgeAttributes( OpenMesh::Attributes::PrevHalfedge );
91 
93  {
94  private:
95  typedef typename Refs::HalfedgeHandle HalfedgeHandle;
96  typedef typename Refs::Scalar Scalar;
97  typedef typename Refs::Point Point;
98  HalfedgeHandle red_halfedge_handle_;
99  unsigned int generation_;
100  bool red_;
101  Scalar quality_;
102  Point midpoint_;
103  Point position_;
104 
105  public:
106  const unsigned int& generation() { return generation_; }
107  void set_generation(const unsigned int& _g) { generation_ = _g; }
108  void inc_generation() { ++generation_; }
109  void set_red() { red_ = 1; }
110  void set_green() {red_ = 0; }
111  bool is_red() { return red_; }
112  bool is_green() { return !red_; }
113  void set_red_halfedge_handle(HalfedgeHandle& _heh)
114  { red_halfedge_handle_ = _heh; }
115  HalfedgeHandle& red_halfedge_handle() { return red_halfedge_handle_; }
116  void set_quality(Scalar& _q) { quality_ = _q; }
117  Scalar& quality() { return quality_; }
118  const Point& midpoint() const { return midpoint_; }
119  void set_midpoint(const Point& _p) { midpoint_ = _p; }
120  const Point& position() const { return position_; }
121  void set_position(const Point& _p) { position_ = _p; }
122  };
123 
125  {
126  private:
127  typedef typename Refs::Point Point;
128  typedef typename Refs::Scalar Scalar;
129  Point midpoint_;
130  Scalar length_;
131  Point position_;
132  public:
133  const Point& midpoint() const { return midpoint_; }
134  void set_midpoint(const Point& _vh) { midpoint_ = _vh; }
135  const Scalar& length() const { return length_; }
136  void set_length(const Scalar& _s) { length_ = _s; }
137  const Point& position() const { return position_; }
138  void set_position(const Point& _p) { position_ = _p; }
139  };
140 
142  {
143  private:
144  typedef typename Refs::Point Point;
145  Point new_pos_;
146  Point orig_pos_;
147  Point position_;
148  unsigned int generation_;
149  public:
150  const Point& new_pos() const { return new_pos_; }
151  void set_new_pos(const Point& _p) { new_pos_ = _p; }
152  const unsigned int& generation() const { return generation_; }
153  void set_generation(const unsigned int& _i) { generation_ = _i; }
154  const Point& orig_pos() const { return orig_pos_; }
155  void set_orig_pos(const Point& _p) { orig_pos_ = _p; }
156  const Point& position() const { return position_; }
157  void set_position(const Point& _p) { position_ = _p; }
158  };
159 };
160 
161 //=============================================================================
162 } // END_NS_UNIFORM
163 } // END_NS_SUBDIVIDER
164 } // END_NS_OPENMESH
165 //=============================================================================
166 #endif // OPENMESH_SUBDIVIDER_UNIFORM_COMPOSITETRAITS_HH defined
167 //=============================================================================
168 
Add normals to mesh item (vertices/faces)
Definition: Attributes.hh:87
#define FaceTraits
Macro for defining the face traits. See Specifying your MyMesh.
Definition: Traits.hh:108
#define VertexTraits
Macro for defining the vertex traits. See Specifying your MyMesh.
Definition: Traits.hh:96
#define EdgeTraits
Macro for defining the edge traits. See Specifying your MyMesh.
Definition: Traits.hh:104
Vec3f Point
The default coordinate type is OpenMesh::Vec3f.
Definition: Traits.hh:129
This file defines the default traits and some convenience macros.
This file provides some macros containing attribute usage.
Base class for all traits.
Definition: Traits.hh:126
Contains all the mesh ingredients like the polygonal mesh, the triangle mesh, different mesh kernels ...
Definition: MeshItems.hh:64
Uniform Composite Subdivision framework.
Definition: CompositeTraits.hh:84

Project OpenMesh, ©  Computer Graphics Group, RWTH Aachen. Documentation generated using doxygen .